Name
Mr. Nilesh Chandrakant Dhobale
Position
Assistant Professor
Department
Mechatronics Engineering
Email id
This email address is being protected from spambots. You need JavaScript enabled to view it.
Cell No
+91 9673035530
Extension No
-
Qualifications
B.E(Mechanical Engg.), MTech (Mechatronics Engg.), PhD Pursuing (Mechatronics Engg.)
Experience
Teaching – 4.5 Year
Industry – 00 Year
Research Areas
Mechatronics, Robotics, Condition monitoring using Artificial Intelligence, Artificial Intelligence, Automation & Control systems
Publications
1. NC Dhobale,SS Mulik, R Jegdeeshwaran,Supervision of miiling tool inserts using conventional and artificial intelligence approach- A Review,Journal of sound and Vibration,vol 55(2),2021.
2. NC Dhobale,SS Mulik ,SPDeshmukh,Naïve Bayes and Bayes net classifier for fault diagnosis of end milling tool using wavelet analysis – A Comparative study,Journal of Vibration engineering and technologies,vol10,2022
3. Sharad Mulik, Nilesh Dhobale,Kanchan Pujari,Kailash Karande, An Artificial intelligence based approach for Biomedical Application, CRC Press Taylor and Francis, Book Chapter 2022.
4. Nilesh Dhobale, Sharad Mulik,Suhas Deshmukh, Kaustubh Ganer Condition monitoring of multipoint end mill tool using statistical features and J48 algorithm, Journal of Maharaja Sayajirao university of baroda,2021
5. Chandan M N, Sharad Mulik, Nilesh Dhobale,Fault diagnosis of drilling tool using vibration signals and Lazy learning classifier, Journal of Maharaja Sayajirao university of baroda,2021.
6. Milind Rohokale,Sharad Mulik,Nilesh Dhobale, Condition Monitoring of Broaching tool Using K -Star Algorithm, Journal of Maharaja Sayajirao university of baroda,2021.
7. Dhananjay Kankal,RL Edlabadkar,Nilesh Dhobale, Wave Energy Convertor Technology: A Review, Journal of Maharaja Sayajirao university of baroda,2021.
8. Nilesh C Dhobale, Krishagana S Chauhan, Tejas S Gaikwad, Health monitoring of VMC machine tool using Arduino UNO (vibration measurement) and machine learning algorithms AI, Journal of Emerging technologies and innovative research,2023.
9. Nilesh C Dhobale, Krishagana S Chauhan, Tejas S Gaikwad, Health monitoring of vmc machine tool using arduino uno and machine learning algorithms, International Journal of creative research thought,2023.
Conferences
1. PatangeA.D, R.Jegdeeshwaran, NC Dhobale, Milling cutter condition monitoring using machine learning approach, International conference of mechanical power Transmission,IIT Madras,2020.
2. NC Dhobale, SS Mulik, R. Jegdeeshwaran, Kaustubh Ganer, Multipoint milling tool supervision using artificial neural network approach,materials today procedings,vol 45 part 2,2021
Workshops
1. One week faculty development program on ‘Use of AI in Mechanical Engineering’ at RMD Sinhgad School of Engg Warje Pune,2021
2. One week faculty development program on ‘Multidisciplinary faculty development program, at ISBM College of Engg. Pune,13-19 Dec 2023.
3. Faculty development program on ‘Machine Learning’ at DYP Akurdi Pune 2023.
Reviewer
Professional Affiliations
Lifetime member of IAENG
Awards & Recognitions
1. Elite grade on NPTEL course on ‘Introduction to Machine Learning’ by IIT Madras
2. Keynote speaker on Research: Design, IPR& Publication
h-index (Scopus)
5
RG Score (Research Gate)
69.3
ORCID
0000-0003-1951-7117
Industry Connect
Funded Projects
Responsibilities @MMIT
IIC Convenor, ERP Coordinator, Member R&D
DR. JAYASHREE DEKA
ASSISTANT PROFESSOR
MECHATRONICS ENGINEERING
+91 8308801860
Ph.D.(EEE),M.Tech (ELDT), BE (Instrumentation)
Teaching – 6.5 year
Industry – 1 Year
Image processing, Deep Learning, AI/ML
1. Deka, Jayashree & Laskar, Shakuntala & Bakalial, Bikramaditya. (2023). Automated Freshwater Fish Species Classification using Deep CNN. Journal of The Institution of Engineers (India): Series B. 104. 10.1007/s40031-023-00883-2.
2. Deka, Jayashree & Laskar, Shakuntala & Bakalial, Bikramaditya. (2022). FRESHWATER FISH SPECIES CLASSIFICATION USING DEEP CNN FEATURES. ICTACT Journal on Image and Video Processing. 12. 2721-2729. 10.21917/ijivp.2022.0386.
3. Deka, Jayashree & Laskar, Shakuntala. (2020). Performance Comparison of FOD based Edge Detector and Traditional Edge Detectors on Fish Image Edge Detection. 485-490. 10.1109/ComPE49325.2020.9200022.
4. Deka, Jayashree & Laskar, Shakuntala. (2020). Comparative Analysis of FOD based Prewitt, Sobel & Laplacian Operators for Edge Detection on Freshwater Fish images. 65-70. 10.1109/ESCI48226.2020.9167538.
5. Mahadik, Chetan & Mahindrakar, Sumit & Deka, Jayashree. (2014). An Improved and Efficient Power Bicycle system with the Power of Real time Information Sharing.,MJET
6. Deka, Jayashree & Madhukar, Taur & Arun, Tarate. (2014). Speed control of DC motor using PIC 16F877A microcontroller. 1. 223-234..MJET
IEEE-2
· Successfully Completed OpenCV Bootcamp from OpenCV University with 85% in 2 nd April 2024.
· Completed a certification course on Python for Machine Learnings from Great Learnings in March 2024.
· Online Workshop on Python Programming with Engineering Applications at Assam Don Bosco University,7-12th Aug’23
· Successfully completed a three-day in-house training in “Data Analytics, Machine Learning & Visualization on GPU” at Maritime Research Centre, Pune, in June 2018.
· Attended two days international workshop on “Information and Communication
· Technology” at KJ College of Engineering, Pune on 11 th – 12 th March ’13.
· a seminar on “Instrumentation, Operation, and Control of Power System” at GIMT, Guwahati, held on 28 th and 29 th April ’11.
· Attended one-week STP on “Optimization Techniques” at NITTTR, Chandigarh held in May ’11.
· Successfully completed a two-week workshop on” Basic Electronics” conducted by IIT Bombay from 28 th June ’11 to 8 th July ’11.
· Attended a one-week STP on “Control System and MATLAB Simulation” at NITTTR, Kolkata extension center held on 5 th September ’11.
Scientific Reports (Springer Nature), IET Image Processing,Journals of Institution of Engineers: Series B(Springer Nature),Indian Journal of Geo-marine Sciences, ADBU Journal of Technology
IAENG
Gold Medalist in M.Tech,GATE’07 qualified
3
-University Syllabus,MOM,MOOC,Awards/Recognition received by Faculty, Awards/Recognition received by students,publications by department faculty,patents,publications by students
MAYURI SANJAY MHASKE
+91 8149137535
M.E. (Design), BE (Mechanical)
Teaching – 10 years
Industry – 0
1. Experimental Investigation and Analyze the Effect of Varying L/D
on Thermal Performance of Vortex Tube, International Journal of
Innovative Research in Advanced Engineering Volume 10 Issue 6 ISSN 2349-2163 June 2023
2. Design and manufacturing of a handy press for bush fitting using
double acting hydraulic cylinder, International Research Journal of Engineering and Technology Volume 3 Issue 2 ISSN 2395-0072 Feb 2016
3. Various approaches to eliminate MIG welding and defects occurring in DT Cap fitting in a three-wheeler shock absorber, International Research Journal of Engineering and Technology Volume 3 Issue 2 ISSN 2395-0072 Feb 2016
4. Detection of crack location and depth in a cantilever beam by vibration measurement and its comparative validation in ANN and GA, International Journal of Research in Engineering Technology volume 4
issue 10 ISSN 2321-7308 Oct 2015
1. Staff coordinator for two-day National level conference on Implementation of NEP 2020 organized by DPCOE sponsored by SPPU Pune on 10th & 11th February 2023
1. Attended 6 days FDP on Geometric Dimensioning & Tolerances organized by BSIOTR Pune from 17th April to 22nd April 2023
2. Attended Online course on SAR Data processing & its application with special Emphasis on RISAT-1A/EOS-4 by IIRS, Dehradun from 10th April to 14th April 2023
3. Attended 5 days FDP on Computer-aided engineering analysis using ANSYS organized by VIIT Pune from 17th July to 21st July 2023
4. Attended one-week National level FDP on Cloud Infrastructure (AWS) organized by DPCOE in association with AICTE & Brainovision Solutions Pvt Ltd from 21st to 25th August 2023
1.Lifetime Member of ISTE Staff Chapter (LM 106360)
2. Member of International Association of Engineers
3.Member of All India Council for Technical Skill development.
Certification of 5 out of 8 modules in NITTT, an initiative by AICTE, has been achieved.
0009-0006-4120-0115
Result Analysis Coordinator, Website Coordinator
KISHOR BALASAHEB NARWADE
CIVIL ENGINEERING
+91 8888089153
M.Tech (Structures), BE (Civil)
Teaching – 3 year
1. Kishor Narwade, Prof. J. P. Patankar, “EFFECT OF TUNED MASS DAMPER AND MULTIPLE TUNED MASS DAMPER ON THE VIBRATION OF CHIMNEY SUBJECTED TO SEISMIC LOAD”, In: International Journal of Engineering Applied Sciences and Technology, 2019 Vol. 4, Issue 3, ISSN No. 2455-2143, Pages 266-276
DOI: https://www.ijeast.com/papers/266-276,Tesma403,IJEAST.pdf
● Gujal Construction
● Om buildcon
● Suyog Development Co. Ltd
● Coordinator for Civil Work and Maintenance of MMIT Campus.
● NAAC Departmental Coordinator
● Functional committee member under AICTE/NIRF/DTE/AISHE
● Functional Committees - Student Affairs- Hostel and mess committee member
● Internal Examiner for SE and TE
● NBA Criteria head 6 Facilities and Technical Support
● GFM of SE A2 batch
● Lab in-charge Civil Department- Engineering Geology lab
● Internship coordinator under the dean functional committee
Mr. Nilesh N. Satonkar
Mechanical Engineering (ROAI)
9021836099
---
M.Tech. (CAD/CAM), Ph.D. (Pursuing)
02 years (Teaching), 07 years (Research)
Computer Aided Engineering, Artificial Intelligence
1.Satonkar Nilesh and Venkatachalam Gopalan, "A Review on Electromagnetic Sheet Metal Forming of Continuum Sheet Metals." SAE International Journal of Materials and Manufacturing, 12(2), (2019), pp.121-134. (Scopus)
2.Satonkar Nilesh and Venkatachalam Gopalan, "Simulation of Electromagnetic Forming Process and Optimization of Geometric Parameters of Perforated Al Sheet Using RSM." Mathematics, 11(9), (2023), pp. 1983. (Scopus, SCI Impact Factor:2.59)
3.Venkatachalam, G., Reddy, D. M., Tiwari, S. K., Satonkar, Nilesh., & Kovalan, S. (2019). Fracture and flexural analysis of sandwich panel with polypropylene honeycomb as core and jute fabric reinforced epoxy matrix composite as skin layer. Materials Research Express, 6(11), 115348. (Scopus; SCI impact factor – 2.3)
4.Gopalan, V., Bhardwaj, P., Satonkar, Nilesh., & Pragasam, V. Determination of fatigue limit of coir/CNT/fly ash reinforced epoxy polymer matrix composite. Periodica Polytechnica Mechanical Engineering, (2020),64(3), 248-255. (Scopus)
5.Gopalan, V., Sharma, S. K., Jangid, A. K., Pragasam, V., Satonkar, Nilesh., & Chinnaiyan, P. (2020). Investigations on tensile and flexural characteristics of fly ash and banana fiber-reinforced epoxy matrix composites. Engineering Transactions, 68(1), 89-101. (Scopus)
6. Viswanath Shreya, Riya Vasan, Venkatachalam Gopalan and Satonkar Nilesh. "Prediction of drag coefficient of a hybrid body design of aircraft." Mechanics and Advanced Technologies 7, no.3 (2023). (Scopus)
7.Senthilnathan, N., Venkatachalam, G., & Satonkar Nilesh (2014). A two-stage finite element analysis of electromagnetic forming of perforated aluminium sheet metals. Procedia Engineering, 97, 1135-1144. (Scopus)
FDP/Workshop
11
1.Reviewer for Journal of Manufacturing Processes
2.Reviewer for QEIOS Journal
SAE Member, IEI Member
Involved in assisting for various NAAC criterion
Mr. Nilesh C. Dhobale
Mechanical Engg.
+91-9673035530
MTech (Mechatronics), PhD Pursuing
04 Year
Mechatronics, Robotics, Condition monitoring using Artificial Intelligence
Assistant to NAAC Work
Dr. Snehal A. Karad
Associate Professor
Computer
9922426042
Ph.D.(CSE), ME(CE), BE(CE)
8 Years
Big data security
Total Publications: 12
1. Snehalata Funde, Gandharba Swain, "Big Data Privacy and Security Using Abundant Data Recovery Techniques and Data Obliviousness Methodologies," in IEEE Access, vol. 10, pp. 105458-105484, 2022, doi: 10.1109/ACCESS.2022.3211304. SCIE indexed journal.
2. Snehalata Funde, Gandharba Swain, “Security Aware Information classification in Health Care Big Data”, International Journal of Electrical and Computer Engineering, Vol. 11, No. 5, 2021, pp. 4439-4448, indexed in Scopus and listed in Q2.
3. Snehalata Funde, Gandharba Swain, “HORAM: Hybrid Oblivious Random Access Memory Scheme for Secure Path Hiding in Distributed Environment”, International Journal of Advanced Computer Science and Applications, Vol. 12, No. 11, 2021, indexed in ESCI and Scopus and listed in Q3.
4. Snehalata Funde, Gandharba Swain, “Data Recovery Approach using Optimized Cauchy Matrix Generator in Distributed Storage System”, International Journal of Advanced Computer Science and Applications, Vol. 13, No. 06, 2022. Indexed in ESCI and Scopus and listed in Q3.
5. Paper on “Big Data Storage and Access: A Security Analysis” is published in Scopus Indexed Journal
of Advanced Research in Dynamical and Control Systems in 2018.
6. Paper on “A Survey on Privacy Preserving Techniques in WSN" is published in International Journal of Computer Applications (0975-8887) Volume 86 - Number 1 Year of Publication: 2014
7. Paper on “Privacy and Integrity Preservation of Equality Tuple Queries using pairing based homomorphic cryptosystem in WSN" in IJARCSSE 2014.
8. S. K. Funde, Crop Production Identification with the help of Data Mining Technique, Jounal of Emerging Technologies and Innovation Research, 2018.
9. S.K.Funde, Survey on privacy reservation of big data via hybrid cloud, International Journal of Recent Engineering Research and Development (IJRERD), 2016.
10. S.K.Funde, RN-Chatter application for android mobiles, International engineering research journal, 2016.
11. Paper presented in cPGCON-2014 Third Post Graduate Conference for Computer Engineering on “Privacy and Integrity Preserving Tuple Queries Using Homomorphic Cryptosystem in Wireless Sensor Network" at Nashik Matoshri college of Engineering and Research.
12. S.K.Funde, L. M. Bharate, S. B. Karale, “Phase Based Scheduler With Virtual Space To Reduce Job Execution Time And Improve Resource Utilization”, 2016.
· Attended workshop “User Centered Design Process” at BSCOER, Narhe.
· Attended Two-Day FDP on Computer Laboratory – I on 2nd & 3rd July 2015 at GHRIET, Pune.
· Participated in workshop on “Hadoop Technology” at BSCOER Narhe.
· Participated in workshop on “LATEX” at NTC RSSOER.
· Attended Microsoft Power BI workshop at GHRCEM.
· Attended Universal Human Value workshop at GHRCEM.
· Conducted Java programming workshop
· Organized SDMT faculty workshop.
Research Paper Reviewer for MAT journal and ICISML conference
Paper Reviewer
MAT journal, ICISML Conference
* mark fields are compulsory
Powered by ChronoForms - ChronoEngine.com