Faculty Publications

• Dr. B. D. Patil published a research paper titled "Exploring Nonlinear Behavior of Gasket Joints in DEF Dosing Units through Finite Element Analysis" in the journal Communications on Applied Nonlinear Analysis, Volume 1s (2024), Issue 1, ISSN: 1074-133X, in June 2024. 

• Dr. B. D. Patil also published a paper titled "A Machine-based Robotic System for Precision Grinding Wheel Saw Replacement: Mathematical and Non-linear Analysis Perspective" in Communications on Applied Nonlinear Analysis, Volume 1s (2024), Issue 1, ISSN: 1074-133X, in June 2024.

• Dr. B. D. Patil authored another paper titled "Enhanced Sensitivity Iontronic Pressure Sensor Gauge Using Laser-created Micro-pyramid Structures for Wide Linear Range", published in Journal of Polymer & Composite, Volume 12, ISSN: 62321-8525, in August 2024.

• Dr. G. L. Allampallewar, Dr. B. D. Patil, and Dr. S. V. Mutalikdesai co-authored a paper titled "Heat Transfer Analysis of Environment-Friendly Refrigerants Using Conventional and Minichannel Condensers in Versatile Refrigeration Systems", published in the International Journal of Heat & Technology, ISSN: 0392-8764, in December 2024.

• D. P. Yesane and Dr. R. V. Bhortake published a paper titled "Analytical Modeling and Validation of Residual Stresses in the Coiling and Uncoiling Process of Advanced High Strength Steel" in Nanotechnology Perceptions, Volume 20, No. 4, ISSN: 1660-6795, in 2024.

• Another research paper by D. P. Yesane and Dr. R. V. Bhortake titled "AI-Driven Optimization of Roll Forming Parameters for Defect-Free Manufacturing in Advanced High-Strength Steels" was published in the Panamerican Mathematical Journal, Volume 35, No. 1, ISSN: 1064-9735, in 2025.

• D. P. Yesane and Dr. R. V. Bhortake also authored the paper "An Analytical Solution for the Evaluation of Residual Stresses in Coiling of Metal Sheets", which appeared in Forces in Mechanics, Volume 18, E-ISSN: 2666-3597, in February 2025.

• Mrinal Joshi, Sudhir More, Ramesh Singh, “Experimental Characterization of Hydrodynamic Nanopolishing of Flat Steel Plates”, Precision Engineering, Volume 36, Issue 3, 2012 PP 424-434
• Sudhir More, Ramesh Singh, Suhas Joshi “Experimental characterization of plane and conformal hydrodynamic polishing of machined single crystal sapphire “Manufacturing Letters”, volume 1, Issue 2-4,2012
• Sudhir More, Amol Bhanage, “Process Optimization on EDM Machines to increase productivity, Quality and Reduced cost “, March 2014, ISSN 0976-6693
• Sudhir More et al, “Design and Performance Analysis of Solar Still”, International Journal of Current Engineering and Technology”, Special Issue-6, Oct 2016, pp205-208
• Sudhir More et al, ”Experimental Analysis of Hydrodynamic Polishing Process”, International Journal of Current Engineering and Technology”, Special Issue-6, Oct 2016, PP 141-143
• Anjali J. Joshi, Formulation and optimization of Mathematical Model of Fabrication Time of a stone crushing plant – Based on dimensional a analysis and multiple regression analysis including sensitivity analysis, “International conference on Advance technologies for societal applications” Volume -2, Issue-1, 2013
• Anjali J. Joshi, Dr. Jayant P. Modak, “ Formulation of Mathematical Model for Maintenance Cost of a Stone Crushing Plant Based on Dimensional Analysis and Multiple Regression” ,International Journal of Mechanical &industrial Engineering, ISSN No. 2231 –6477, Volume -3, Issue-2, 2013
• Anjali J. Joshi, Dr. Jayant P. Modak, “Design and development of a Alternate Mechanism for Stone Crusher Using Relative Velocity Method”, International Journal of Advance Research in Mechanical Engineering, ISSN: 2231 –5950, Volume 3, Issue 2, 2013
• Anjali J. Joshi, Dr. Jayant P. Modak, “Kinematic Synthesis and Analysis of Alternate Mechanism for Stone Crusher Using Relative Velocity Method,” International journal of Scientific Research, Volume 2 ,Issue 3:March 2013,ISSN-2277-8179
• Anjali J. Joshi, Dr. Jayant P. Modak, “A Generalized Approach for Kinematic Synthesis and Analysis of Alternate Mechanism for Stone Crusher Using Relative Velocity Method”, International Journal of Engineering Research and Application, Volume 3,Issue 2 March –April 2013 p.p189-194,ISSN-2248-9622
• Anjali J. Joshi, Dr. Jayant P. Modak, “Design and Development of a small capacity stone crusher mechanism”, Indian Journal of Applied Research, Volume: 3, Issue: 2 February 2013, ISSN - 2249-555X
• Girish L. Allampallewar, Vishal S. Shitole, “Comparative Finite Element Analysis Of Gas Turbine Blade For Super Alloy And Composite Material”, International Conference on Design, Manufacturing and Mechatronics ICDMM2015, ICDMM2015-073, February 2015, Page no. 277-282
• Girish L. Allampallewar, PushkarPawar, Pooja Gade , “Cell Phone Operated Stair Climbing SPY Robot”, International Journal of Current Engineering and Technology , E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
• G. L. Allampallwar, MartandPandagale Saurabh Bhand, Sumesh Pillai, VikasShinde, ShubhamBaviskar , “Static Analysis of ATV Roll Cage”, International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
• G.L.Allampallewar, Divyal P. Bagul, Abhiraj S. Galande, Amol M. Rathod, Ketan R. Behere, “Improvement in Heat Transfer Rate and Dynamics of Shrouded Fanned Radiator System”, International Conference on Ideas, Impact and Innovation in Mechanical Engineering (ICIIIME 2017), Volume: 5 Issue: 6, ISSN: 2321-8169; 1213 – 1219
• D.P.Yesane, Dr.R.S.Hingole 2016: The investigation of effects of roll forming parameters on shape defects of channel section, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 244-247
• SanketKhuley, Ashish Powar, Hrishikesh Joshi and D.P. Yesane 2016: International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 275-280
• Hrishikesh Joshi, Ashish Powar, SanketKhuley and D.P.Yesane 2016: Analysis and Topological Optimization of Motorcycle Front Wheel, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 265-269
• Ashish Powar, Hrishikesh Joshi, SanketKhuley and D.P. Yesane 2016: Analysis and Topological Optimization of Swing-arm, International Journal of Current Engineering and Technology, E-ISSN2277-4106, P-ISSN 2347-5161: 270-274
• DayaYesane, Dr.R.S.Hingole 2015: Computational and experimental studies in roll forming research
• DayaYesane, Nilima Patil 2013: Optimization of 6-cylinder Engine Crankshaft subjected to Dynamic Loading, Vol - 1 (ISBN: 978-81-920561-2-8).
• S.R.Valvi, V.D.Jadhav, D.P.Yesane 2014: Assessment of bioactive compounds from five wild edible fruits, Ficusracemosa, Elaegnusconferta, Grewiatillifolia, Scleicheraoleosa and antidesmaghasembilla. 3(1):549-555.
• Sujata Valvi, V. S. Rathod and D. P. Yesane 2011: Screening of three wild edible fruits for their antioxidant potential. Curr.Science.2 (1): 48-52.
• Sujata Valvi, D. P. Yesane and V. S. Rathod 2011: Isolation of antioxidant enzymes from wild edible fruits at mature and ripened stage Curr. Science. 2(1):53-55.
• Amol Bhanage, Rajat Patil, D M Atar and NileshSatonkar, “Reduction of breakdown time of CO2 Welding machine through Data Analysis”, National Conference on Statistical Analysis and Computing in Engineering and Management (NC-SACEM 2014), 7-8 Aug 2014, D. Y. Patil College of Engineering, Akurdi, Pune
• Patil Vijay B., Bhanage Amol S. AtarDadasaheb M., “Optimization of Process Parameters of Abrasive Flow Machining for Super Finishing of Non-Ferrous Material of Nozzle Used for Plasma Machining”, International Conference on Design, Manufacturing and Mechatronics, (ICDMM 2014). 9-10 Jan 2014, KJ Trinity COE, Pune.
• Dadasaheb M Atar , “ Reverse Engineering of Clutch Plate Operating Lever by Coordinate Measuring Machine, SEM, OPPetc.” “AAVISHKAR -2004” Govt. College of Engineering Karad
• Amol Bhanage and K. Padmanabhan, “Design for Fatigue and Simulation of Glass Fibre/Epoxy Composite Automobile Leaf Spring”, ARPN Journal of Engineering and Applied Sciences, ISSN 1819-6608, Vol. 9, No. 3, March 2014 (Elsevier Scopus Index), H-Index: 15
• Amol Bhanage and Dr. K. Padmanabhan, “Static and Fatigue Simulation of Automotive Anti Roll Bar Before DBTT”, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 71 (2015) Special Issues (Scopus Index), H-Index: 13
• Amol Bhanage, Dr. K. Padmanabhan and RupeshSundge, “Static and Fatigue Simulation of Telescopic Fork Suspension System Used for Motorcycle”, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 71 (2015) Special Issues (Scopus Index), H-Index: 13
• Amol Bhanage, Dr. K. Padmanabhan, “Fatigue and Crashworthiness of Automobile Materials after DBTT and Hygrothermal Conditioning: A Review”, International Journal of ChemTech Research", ISSN 0975-4024, Volume-10, Issue-3, 2017 (Scopus Index), H-Index: 29
• Amol Bhanage, RupeshSundge, Abhishek Chavan, “Design Simulation Comparison of Mono Leaf Spring Using E-Glass Epoxy, Carbon Epoxy and Kelvar Epoxy Materials for Automotive Performance”, Indian Journal of Science and Technology, ISSN 0974-5645, Volume 9 S (1), December 2016 (Elsevier Scopus Index), H-Index: 25
• Amol Bhanage, NileshSatonkar, PratapDeshmukh, RupeshSundge, “Evaluation of Crashworthiness for SAE Materials under Ductile to Brittle Transition Temperature (DBTT)”, International Journal of Engineering and Technology (IJET), ISSN 0975-4024, Vol 6 No 5 Oct-Nov 2014 (Scopus Index), H-Index: 13
• Amol Bhanage, “Development and Automation of Loft Surface for Sheet Metal Components”, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 9, Number 19 (2014) (Scopus Index), H-Index : 13
• Amol Bhanage, SurajBedse, KevalDevare, VarsharaniBatte, Komal Dixit, “Design and Development of All Wheel Nut Remover for Automotive”, International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 7 (2015) (Scopus Index), H-Index: 13
• Amol Bhanage, NileshSatonkar, RupeshSundge, KunalNawasagare, “Reduction of breakdown time of CO2 Welding machine through Data Analysis,” International Journal of Applied Engineering Research, ISSN 0973-4562, Volume 10, Number 5 (2015) (Scopus Index), H-Index: 13
• Amol Bhanage, RupeshSundge, Abhishek Chavan, “Finite Element Simulation & Optimization of Steering Gear Sector Shaft Fixture Plate”, International Journal of Engineering and Technology (IJET), ISSN 0975-4024, Vol 8 No 5, Oct-Nov 2016 (Scopus Index), H-Index: 13
• Mr. Amol Bhanage, “An Overview of Flat Pattern Development (FPD) Methodologies Used in Blank Development of Sheet Metal Components of Aircraft”, International Journal of Mechanical Engineering and Robotics Research, ISSN 2278 – 0149, Vol. 3, Issue. 2, April 2014 (Impact Factor: 1.009, Scopus Index)
• Amol Bhanage, Sudhir More, S. V. Chaitanya, Rajat Patil, “Process Optimization on EDM Machines to increase Material Removal Rate for Increased Productivity, Quality and Reduced Cost”, International Journal of Engineering Sciences, ISSN 0976-6693, 8(2) (2014) (Scopus Index)
• Amol S. Bhanage, Vijay B. Patil and Rajat S. Patil, “A Review: Finite Element Simulation of Automotive Drive Shaft Using Composite Materials”, International Journal of Current Engineering and Technology, ISSN 2277 – 4106, Special Issue-3, April 2014 (Index in University Library of Regensburg, Thomson Reuters, Impact Factor : 6.125)
• Vijay B. Patil, Amol S. Bhanage, Rajat S. Patil, “Analysis and Optimization of Process Parameters of Abrasive Flow Machining Process for Super Finishing of Non-Ferrous Material Nozzle”, Applied Mechanics and Materials Journal, ISSN 1660-9336, Vol.612 (2014) (Elsevier Scopus, Thomson Reuters Index), H-Index: 23
• Amol Bhanage, “Design Simulation Comparison of Mono Leaf Spring Using SAE 1045 – 450– QT and E- Glass Epoxy materials for Automotive Performance”, International Journal of Inventive Engineering and Sciences (IJIES) ISSN 2319–9598, Volume-2, Issue-1, December 2013 (ISI Index, Impact factor: 2.18)
• Amol Bhanage, Vijay Bhanage, “Design and Modelling of 6 In 1 All-Nut Remover for Automobile Wheels”, International Advanced Research Journal in Science, Engineering and Technology, ISSN 2393-8021, Vol.3, Special Issue 1, March 2016
• Amol Bhanage, Anil Bhange, Tushar More, “Design and Development of Blanking and Forming Die for Shock Absorber Mounting Assembly”, International Journal of Current Engineering and Technology, ISSN 2277 – 4106, Special Issue 6, Oct 2016 (Index in University Library of Regensburg, Thomson Reuters, Impact Factor: 6.125)
• Amol S.Bhanage, ReshmaJawanjal, SahilBhamer, Prabjot Kaur Ture, Manish Gharti, “Finite element simulation of oil canning for automotive exterior panels”, International Journal of Current Engineering and Technology, ISSN 2277 – 4106, Special Issue 6, Oct 2016 (Index in University Library of Regensburg, Thomson Reuters, Impact Factor : 6.125)
• Prabjot Kaur Ture, Manish Gharti, ReshmaJawanjal, SahilBhamer, Amol S. Bhanage, “An overview of Buckling Analysis of cylinder subjected to axially compressive load”, International Journal of Current Engineering and Technology, ISSN 2277 – 4106, Special Issue 6, Oct 2016 (Index in University Library of Regensburg, Thomson Reuters, Impact Factor : 6.125)
• Meher Ashish, Gawhale Prashant, Khobare Prasad, Amol Bhanage, “Failure Prediction of Glass Fiber Reinforced Composite Material Single Lap Joint: Finite Element Analysis”, International Journal of Current Engineering and Technology, ISSN 2277 – 4106, Special Issue 6, Oct 2016 (Index in University Library of Regensburg, Thomson Reuters, Impact Factor : 6.125
• Amol S. Bhanage, Manish Gharti , Prabjot Kaur Ture, ReshmaJawanjal, SahilBhamer, “Theoretical and Analytical Study on Buckling Of Hydraulic Cylinder”, Proceeding of International Conference on Manufacturing Excellence (ICMAX 2017), 3-4 March 2017, K. K. Wagh Institutes, Nashik, ISBN : 978-93-24457-41-5
• Amol S. Bhanage, PranayKhedkar, RohitMotagi, Tushar More, Anil Bhange “Design and development of brake liner for non-geared two wheeler vehicle”, Proceeding of International Conference on Manufacturing Excellence (ICMAX 2017), 3-4 March 2017, K. K. Wagh Institutes, Nashik, ISBN : 978-93-24457-41-5
• RushikeshShinde†*, VaibhavLavhale†, Ashwin Nair†, ShubhamPawar†, RiteshMahajan“Generation of Electric Power using Turbo Ventilators” International Journal of Current Engineering and TechnologyE-ISSN 2277 – 4106, P-ISSN 2347 – 5161
• Prof.R.G.Mahajan,Prof.S.M.Patil“Development of wall climbing robot for cleaning application”International Journal of Emerging Technology and Advanced EngineeringVOL : 3, ISSUE 5MAY 2013, E-ISSN 2250 – 245
• Dhananjay M Bhoge “Comparison of Flexural Joints Used In Precision Scanning Mechanism Using FEA Tool”, International Journal For Technological Research In Engineering, Volume 3, Issue 2, October-2015 , ISSN (Online): 2347 – 4718
• Dhananjay M Bhoge “Development of ‘XY’ Flexural Mechanism”,International Journal of Current Engineering and Technology,Special Issue-6 (Oct 2016), P-ISSN 2347 – 5161 E-ISSN 2277 – 4106
• Dhananjay M Bhoge “Dynamic Analysis of ‘XY’ Flexural Mechanism”, International Journal of Current Engineering and Technology, Special Issue-6 (Oct 2016), E-ISSN 2277 – 4106, P-ISSN 2347 – 5161
• Sheetal G Nerkar”Numerical Analysis of Pulsating Flow in 2D Channel”, International Journal on Innovation in Mechanical and Automotive Research, ISSN:2395-4493, Vol 1, Issue 2, April 2015
• Sheetal G Nerkar“Effect of Amplitute Ratio on Pulsating Flow, International Journal of Current Engineering and Technology”, ISSN:2277-4106, Special Issue 6, Oct 2016
• Sheetal G Nerkar“A Review on Design and Development of Filament Winding Machine for Composite Materials”, International Journal of Current Engineering and Technology, ISSN:2277-4106, Special Issue 6, Oct 2016
• Nikhileshkamane, RohitPolas, PradyumnaDhamangaonkar, “Heat and flow analysis for air through porous receiver of parabolic dish collector ”, International Journal of Engineering and Technical Research (IJETR), Volume-4, Issue-4, pp 98-101, April 2016
• RohitPolas, Nikhileshkamane, PradyumnaDhamangaonkar, “Concentrating Volumetric Air Receiver Materials: Experimental determination of heat transfer coefficient”, International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Volume-5, Issue-5, pp 6717-6733, May 2016
• Eknath D Kurhe‘Thermal Performance Analysis of A Circular Tube Using Vortex Rings at Various Angle and Pitch Ratio’ in International journal for research in applied science and engineering technology (IJRASET). Vol. 2 Issue VIII, August 2014ISSN: 2321-9653.
• Eknath D Kurhe ‘Experimental Investigation of Heat Transfer Using Inclined Vortex Rings in a Circular Tube With Varying Inclination’
• International Journal For Technological Research In Engineering Volume 1, Issue 12, August-2014. ISSN (Online): 2347 – 4718.
• Eknath D Kurhe ‘Heat Enhancement using TiO2-Nano fluid in Automotive Cooling System’ International Journal of Current Engineering and Technology E-ISSN 2277 – 4106, P-ISSN 2347 – 5161 ©2016 INPRESSCO.