Name

Mr. Naresh B. Dhamane

Position

Mr. Naresh B. Dhamane

Department

Mechanical Engg

Email id

This email address is being protected from spambots. You need JavaScript enabled to view it.

Cell No

9860028501

Extension No

NA

Qualifications 

M.E. Heat Power Engg., B.E. Mech

Experience

Teaching-15 Years, Industrial 2.5 Years

Research Areas

Thermal Engg.

Publications

1. Prof. Mathew V Karvinkoppa,Prof. Murtuza S Dholkhwala, Prof.Naresh B Dhamane,"Heat transfer enhancement using coiled wire inserts in horizontal concentric tubes", International Journal of Emerging Technology & Research, ISSN 2278 - 6082, July 2012, Pg. 1-19

2. Prof. Naresh B. Dhamane, Prof. Mathew V. Karvinkoppa, Prof. Murtuza S. Dholkhwala, "Heat transfer analysis of helical strip insert with regularly spaced cut sections placed inside a circular pipe", International Journal of Modern Engineering Research, ISSN: 2249-6645, Oct 2012, Pg. 3711-3716

3. N. B. Dhamane, Chaitanya Sanghavi, Sachin Margaje, Kasutubh Pimplay,"Optimization, stress analysis and manufacturing hard-facing machine fixture design", International Journal of Engineering Research & Technology, ISSN: 2278-0181, Nov 2013, Pg. 3640- 3645

4. N. B. Dhamane, D. B. Nalawade, M. M. Dange "Experimental study of heat transfer for wavy twisted tape insert of various pitches placed in a circular tube", International Journal of Innovative Research and Development,ISSN 2278 – 0211, Feb-2014, Pg. 141- 146

5. N. B. Dhamane, D. B. Nalawade, M. M. Dange, "Performance analysis of wavy twisted tape insert for heat transfer in a circular tube", International Journal For Technological Research In Engineering, ISSN 2347 - 4718, Feb-2014, Pg. 367-371

6. Mr. Paramveer Patil, Prof. Lalit S. Pawar, Prof. N.B. Dhamane,"Analyzing effect of varying pitch of cut corrugated twisted tape insert on augmentation of heat transfer",International Journal For Technological Research In Engineering, ISSN: 2347 - 4718, Mar-2015, Pg. 664-669

7. Prof. Murtuza S Dholkawala, Prof Mathew V.Karvinkoppa, Prof. Naresh .B.Dhamane,"Improved Triple Effect Absorption Refrigeration",International Journal of Emerging Technology & Research, ISSN 2278 - 6082, Sept 2012, Pg. 1-12

8. Naresh Dhamane, Manoj Sonawane,Yogesh Nikam, Vishal Muley, "Performance of Corrugated Copper Inserts in Heat Exchanger", International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106,Oct 2016, Pg. 78-81

9. Naresh Dhamane, Sachin B. Labade, Dharam S. Maradiya,"Modification and Testing on Major Loss Apparatus by considering various Effecting Parameters", International Journal of Current Engineering and Technology, E-ISSN 2277, Oct-2016, Pg. 100-103

10.  Naresh Dhamane, Mayur Jadhav, Rushikesh Jejurkar, "Augmentation of Heat Transfer using Drilled Hole & Cut Twisted Tape Inserts",International Journal of Current Engineering and Technology, E-ISSN 2277 – 4106, Oct-2016, Pg. 104-108

Conferences

National Conference on Product Modeling, Simulation and Manufacturing

Workshops

1. One day workshop on " FEM& CFD" at M.M.I.T.

2. One day seminar on "Energy Conservation & Auditing" at M.I.T., Kothrud

3.Syllabus Implementation Workshop On BE Mech Examiner Guidelines

4. One day workshop on "Syllabus Revision of subject design of Pumps, Blowers and Compressors" at J.S.P.M., Wagholi

5. Two Days National Level workshop on "Research Methodology" at M.M.I.T.

6. Syllabus Implementation Workshop for the subject Energy Engineering of BE Mech 2015, at Modern C.O.E., Pune

7. STTP on “NBA Accreditation”, at M.M.I.T. through NITTR

8. FDP on Intellectual Property Rights: Issues, Challenges, New Trends & Research Methodology , at M.M.I.T.

9. FDP and Course on IC Engines & Gas Turbines under NPTEL

10. Training of “LibreOffice Suite Calc”, through online mode

11. Workshop on “Introduction To Finite Element Analysis Using FEA Tool”, through online mode, conducted by AnantraoPawar College of Engineering & Research, Pune

12. FDP on “Outcome based education: a step towards Excellence”, organized by Govt. College of Engg., Karad

13. STTP on “Problem Based Learning” through Online mode

14. Seminar on “MOOCS and MOODLE, challenges opportunities in Higher Education”, organized by D.Y. Patil S.O.E., Lohgaon

15. Guest lecture series on “Quality academic research under FDP” organized by MM ShankarraoChavan Law College, Pune

16.AICTE Training And Learning (ATAL) AcademyOnline FDP on "Postharvest and Processing (Food Technology)" from 2-11-2020 to 6-11-2020 at National Institute of FoodTechnology Entrepreneurship and Management.

17. Webinar on“How to Publish Papers in High Ranking Journals?”19thSeptember 2020

18. Masterclass on “Patent Drafting” 28th November, 2020

19. Webinar on Thermodynamics using Flownex Simulation Software, 24th July, 2020

20. Awareness Webinar on Outcome Based Education and Accreditation, 27th November, 2020

21. A STTP on Advanced Applications in Artificial Intelligence and

Machine Learning

22. International Virtual Conference on Emerging Trends in Engg and Mgmt Sciences with paper on "Design and fabrication of Sugarcane Cutting Machine"

23. International Virtual Conference on Emerging Trends in Engg and Mgmt Sciences with paper on "Design of 360 degree Air Cooler"

24. Virtual National Level Faculty Development Program on “NBA Accreditation Process”

25. “One Week Online STTP/Refresher Program on Project Based Learning”

26. Entrepreneurship Program 2021

27. FDP on Zero Based Costing in Mechanical Engg

28. TE Mechanical Syllabus Implementation Workshop, Subject- Machining Science and Technology

29. “Syllabus Implementation Workshop cum faculty development program” for the subject of “Energy Audit and Management”

30. Course on Inventory Module by VM Edulife

31. 3 Days Workshop on "Stepping towards Project Based & Problem Based Learning "

32. 2 Days QIP on National Education Policy

33. One Week National Level FDP on "Exploring Perspectives of AI and ML in Robotics and Automation"

34. Workshop on Innovative Teaching Pedagogy & Skills in NEP

35. NPTEL Workshop

Reviewer

--

Professional Affiliations

- Lifetime Member of Member of SESI,

- Lifetime Member of “International Society for Research and  Development”

-  Member of Institute for Engg Research & Publication

Awards & Recognitions

Got Elite certificate for completing Course on I.C. Engines and Gas Turbine” through N.P.T.E.L.

h-index (Scopus)

3

RG Score (Research Gate)

--

ORCID

https://orcid.org/0000-0003-1323-2604

Industry Connect

1. Rudra Motors, A TATA Service center, Wagholi (Industrial Visit for Applied Thermodynamics subject)

2. Katraj Dairy, Katraj(Industrial Visit for subject Thermodynamics)

3. Ashok Tyres, Kharadi (Internship)

4. Technowings India Automation Pvt Ltd (Placements)

5. Yaan Engg. Solutions (Placements)

6. Sancheti Cold Storages, Sanaswadi (Visit of HVAC)

7. Sai Wheels and Tyres, Charholi (Visit of Skill Development)

8. PDB Engineers (Training)

9. Swami Motors, Lohgaon (Internships)

10. Dynalec Controls Pvt Ltd., Shivane (Internships)

11. Chaitanya EV (Internship)

12. Redi Group (Placement)

13. Pratham Skill Development Center (Internship)

14. Silson Boilers (Visit of Engg thermodynamics)

15. Vandanam Smartech (Placements)

16. Crest Precision Screws Pvt Ltd (Visit)

Funded Projects

--

Responsibilities

 @MMIT

·  NAAC files: Students’ Association, Department Library, MOOCS

·  Audit Course coordinator for Mech Dept

·  MESA- Faculty Coordinator

·  Dept. Library coordinator

·  NBA-Point 9 Incharge

·  Functional Head-Purchase Committee

·  Functional Head-Stock Verification and Furniture Committee

·  Member- Minority Cell

·  Member- MOOCS committee

·  Engg Thermodynamics and Applied Thermodynamics lab in- charge

·  Reader’s Club Coordinator